This project has moved. For the latest updates, please go here.

openPDC Failover Cluster

Dec 11, 2012 at 11:50 AM
Edited Dec 11, 2012 at 12:15 PM

Hi,
I'm trying to configure openPDC on a Windows Server 2008 failover cluster.
I've manage to setup the failover cluster but I'm getting some errors:

1. openPDC Manager
IP address mismatch: unable to find an IPv6 address for "192.168.2.26"
Which I can fix by forcing IPv4 protocol using the following connection string for the node:

RemoteStatusServerConnectionString={server=192.168.2.26:8500;interface=0.0.0.0};DataPublisherPort=6165;interface=0.0.0.0;TimeSeriesDataServiceURL=;RealTimeStatisticServiceUrl=http://192.168.2.26:6052/historian

2. openPDC Console
I'm not sure why, but I'm able to use openPDC Console from inside openPDC Manager, but when I try to use it stand alone:

Exception Source:      TVA.Communication
Exception Type:        System.InvalidOperationException
Exception Message:     IP address mismatch: unable to find an IPv6 address for "192.168.2.26"
Exception Target Site: CreateEndPoint

3. Unknown
This one I'm not sure what is about:

Exception Source:      System.ServiceModel
Exception Type:        System.InvalidOperationException
Exception Message:     A registration already exists for URI 'http://192/'.
Exception Target Site: RegisterUri

If you need any detailed information, please ask...

Thanks in advance,
Hugo.

Dec 11, 2012 at 12:17 PM

Ok, I've managed to workaround the second error by setting "interface=0.0.0.0" on the openPDC Console connection string in the config file.
But I'm still getting the third error...