This project has moved and is read-only. For the latest updates, please go here.

Fail to receive FNET voltage angle and voltage magnitude measurement in openPDC

Feb 7, 2013 at 4:01 PM
Edited Feb 7, 2013 at 4:04 PM
I have installed the recent release of openPDC v1.5 SP1 Release Candidate. I would like to receive data from FNET devices. Although I can see the angle and voltage magnitude data of the FNET devices in PMU connection tester, I cannot get their angle and voltage magnitude measurement in openPDC. While the frequency measurement of an FNET device is automatically created with the device, the voltage angle and magnitude measurements are not. I tried to manually add measurements to the FNET device using measurement type as "voltage phase angle" and "voltage magnitude". But no data was shown for those measurements, although the frequency data for the same device was coming in correctly. I wonder what settings I should further set to make this right.

Thank you very much!