This project has moved and is read-only. For the latest updates, please go here.

Real-Time Data Frequency Measurement Scale Configuration

Nov 24, 2010 at 11:53 PM

Dear openPDC Coordinators,

This is perhaps a silly post: for us in non-60 Hz systems it could be useful to be able to configure the range of the frequency signals to be displayed in the Real-Time Data plot of the "Home" window of openPDC manager.

The current scale is centered around 60 Hz, from 59.95 to 60.05. It would be useful to have to possibility of configuring the lower and upper limit for this scale.

Best,

Luigi

Nov 26, 2010 at 4:26 PM
This discussion has been copied to a work item. Click here to go to the work item and continue the discussion.
Nov 30, 2010 at 3:38 PM

Hi Luigi,

I have completed this work item and checked it in. You can either do get latest or wait till tomorrow morning for nightly build.

You can go to Manage --> System Settings page and define Frequency Range Min and Frequency Range Max values to use on the home page real-time chart. This value will also be used on the new Input Status & Monitoring screen.

Please feel free to contact us if you have any other questions, comments or suggestions.

Thank you,
Mehul Thakkar

Dec 7, 2010 at 1:15 PM

Dear Mehul,

 

Thank you, we have updated our openPDC and checked on your nice improvements, they work great!

See the screenshot at:

http://www.etk.ee.kth.se/personal/vanfretti/temp/00_openpdc_rt.tiff

Best,

 

Luigi